ADVICE & ENQUIRIES: 01268 722 505

Driveway Sealers

PRODUCT DESCRIPTION

Smartseal Driveway sealer is a clear, UV light stable solution designed to penetrate the surface of the block paving and other driveway pavers and is available in 5 or 25 litre containers.

PURPOSE Driveway Sealers

Smartseal driveway sealer and block paving sealer have been made to seal the surface of a driveway and to improve the aesthetic appearance of block paving. The driveway sealer will also provide a barrier to contaminants thereby facilitating easy maintenance. The sealed surface will increase abrasion resistance and also protect the jointing sand from erosion and weed infestation.

SPECIAL PROPERTIES

  • Reduces sand loss from joints
  • Reduces efflorescence
  • Ultra-violet light and weather resistant
  • Inhibits the growth of moss and weeds
  • Enhances the colour of the block paving
  • Facilitates the easy removal of oil and other contaminants
  • Will not blister or peel

Driveway Sealers
APPLICATION INSTRUCTIONS:

Smartseal driveway sealer and block paving sealer can be applied using a sprayer unit or roller, at a rate dependent on type of paver of approx 2 square metres per litre for the 1st coat and 3.5 square metres per litre on the 2nd coat. A two-coat spray application is required to fully cover and harden the jointing sand.

Smartseal driveway sealer and block paving sealer will be touch dry within 2 hours at 20°C and foot traffic may be permitted after 4 hours. Vehicles should be kept off the sealed area for a minimum of 24 hours at 20°C. These times may be increased or reduced depending on the ambient temperature.

See our dedicated driveway sealer and block paving sealer website for further information or for free advice call us on 0800 988 0348